Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- OpenELEC:~ # dmesg
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.112 (jernej@jernej-laptop) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Sat Aug 6 19:15:27 CEST 2016
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun8i
- [ 0.000000] cma: CMA: reserved 256 MiB at 50000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 262144
- [ 0.000000] free_area_init_node: node 0, pgdat c0c00c00, node_mem_map c0ce7000
- [ 0.000000] Normal zone: 1710 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 192850 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 594 pages used for memmap
- [ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
- [ 0.000000] script_init enter!
- [ 0.000000] script_init exit!
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c15fc000 s11648 r8192 d12928 u32768
- [ 0.000000] pcpu-alloc: s11648 r8192 d12928 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
- [ 0.000000] Kernel command line: console=ttyS0,115200 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 consoleblank=0
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 2097152 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 1024MB = 1024MB total
- [ 0.000000] Memory: 760180k/760180k available, 288396k reserved, 270336K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc078c9d8 (7699 kB)
- [ 0.000000] .init : 0xc078d000 - 0xc0b91d80 (4116 kB)
- [ 0.000000] .data : 0xc0b92000 - 0xc0c053f0 ( 461 kB)
- [ 0.000000] .bss : 0xc0c05bb0 - 0xc0ce679c ( 899 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:544
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000214] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
- [ 0.000238] pid_max: default: 32768 minimum: 301
- [ 0.000570] Mount-cache hash table entries: 512
- [ 0.001501] Initializing cgroup subsys cpuacct
- [ 0.001518] Initializing cgroup subsys memory
- [ 0.001566] Initializing cgroup subsys devices
- [ 0.001579] Initializing cgroup subsys freezer
- [ 0.001590] Initializing cgroup subsys blkio
- [ 0.001614] Initializing cgroup subsys perf_event
- [ 0.001640] Initializing cgroup subsys bfqio
- [ 0.001678] CPU: Testing write buffer coherency: ok
- [ 0.001722] ftrace: allocating 21606 entries in 64 pages
- [ 0.030278] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.030295] [sunxi_smp_prepare_cpus] enter
- [ 0.030334] Setting up static identity map for 0x4055f2c8 - 0x4055f320
- [ 0.031261] CPU1: Booted secondary processor
- [ 0.031261] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.031392] CPU2: Booted secondary processor
- [ 0.031392] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.040470] CPU3: Booted secondary processor
- [ 0.040470] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.040591] Brought up 4 CPUs
- [ 0.040591] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
- [ 0.040893] devtmpfs: initialized
- [ 0.050195] wakeup src cnt is : 2.
- [ 0.050207] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
- [ 0.050218] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
- [ 0.050229] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
- [ 0.050241] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
- [ 0.050251] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8
- [ 0.050262] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
- [ 0.050274] sunxi pm init
- [ 0.050413] pinctrl core: initialized pinctrl subsystem
- [ 0.060635] NET: Registered protocol family 16
- [ 0.061479] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.061558] script_sysfs_init success
- [ 0.061588] sunxi_dump_init success
- [ 0.062482] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
- [ 0.063609] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.064190] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.064206] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.064206] script config pll_video to 297 Mhz
- [ 0.064206] script config pll_de to 864 Mhz
- [ 0.064206] script config pll_ve to 402 Mhz
- [ 0.064206] sunxi_default_clk_init
- [ 0.064206] try to set pll6ahb1 to 200000000
- [ 0.064206] try to set ahb clk source to pll6ahb1
- [ 0.064206] set ahb clk source to pll6ahb1
- [ 0.064206] try to set ahb1 to 200000000
- [ 0.064206] try to set apb1 to 100000000
- [ 0.070254] bio: create slab <bio-0> at 0
- [ 0.070360] [ARISC] :sunxi-arisc driver v1.04
- [ 0.088840] [ARISC] :arisc version: [v0.1.58]
- [ 0.179155] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
- [ 0.180732] SCSI subsystem initialized
- [ 0.180732] usbcore: registered new interface driver usbfs
- [ 0.180732] usbcore: registered new interface driver hub
- [ 0.180732] usbcore: registered new device driver usb
- [ 0.180732] twi_chan_cfg()340 - [twi0] has no twi_regulator.
- [ 0.180732] twi_chan_cfg()340 - [twi1] has no twi_regulator.
- [ 0.180732] twi_chan_cfg()340 - [twi2] has no twi_regulator.
- [ 0.180732] Linux media interface: v0.10
- [ 0.180732] Linux video capture interface: v2.00
- [ 0.180762] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.181267] Bluetooth: Core ver 2.16
- [ 0.181303] NET: Registered protocol family 31
- [ 0.181314] Bluetooth: HCI device and connection manager initialized
- [ 0.181327] Bluetooth: HCI socket layer initialized
- [ 0.181337] Bluetooth: L2CAP socket layer initialized
- [ 0.181371] Bluetooth: SCO socket layer initialized
- [ 0.181456] Switching to clocksource arch_sys_counter
- [ 0.193249] FS-Cache: Loaded
- [ 0.193522] CacheFiles: Loaded
- [ 0.204932] NET: Registered protocol family 2
- [ 0.216054] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.216535] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.218295] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.219350] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.219361] TCP: reno registered
- 35365] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
- [ 0.235491] sunxi_reg_init enter
- [ 0.237276] highmem bounce pool size: 64 pages
- [ 0.238179] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.238270] NFS: Registering the id_resolver key type
- [ 0.239121] fuse init (API version 7.18)
- [ 0.239519] msgmni has been set to 1468
- [ 0.240789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.240808] io scheduler noop registered
- [ 0.240816] io scheduler deadline registered
- [ 0.240877] io scheduler cfq registered
- [ 0.240931] io scheduler bfq registered (default)
- [ 0.240940] BFQ I/O-sche] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 0.330465] sw_uart_pm()890 - uart0 clk is already enable
- [ 0.330483] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
- [ 0.525263] console [ttyS0] enabled
- [ 1.063162] loop: module loaded
- [ 1.066868] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
- [ 1.073941] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator.
- [ 1.081514] spi spi0: master is unqueued, this is deprecated
- [ 1.088072] tun: Universal TUN/TAP device driver, 1.6
- [ 1.093692] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.101446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Drive1394] hub 1-0:1.0: 1 port detected
- [ 1.205989] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.214899] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
- [ 1.223850] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
- [ 1.250051] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
- [ 1.250067] ehci_irq: highspeed device connect
- [ 1.250611] hub 2-0:1.0: USB hub found
- [ 1.250629] hub 2-0:1.0: 1 port detected
- [ 1.270866] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.279765] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
- [ 1.288585] sunxi-eh number 4
- [ 1.363646] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
- [ 1.390040] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
- [ 1.397177] hub 4-0:1.0: USB hub found
- [ 1.401368] hub 4-0:1.0: 1 port detected
- [ 1.405957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.432888] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.441415] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5
- [ 1.449836] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
- [ 1.510046] ehci_irq: highspeed device disconnect
- [ 1.514594] hub 5-0:1.0: USB hub found
- [ 1.518762] hub 5-0:1.0: 1 port detected
- [ 1.543361] sunxi-ohci sunxi-ohciOpen' Host Controller (OHCI) Driver
- [ 1.662028] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7
- [ 1.670470] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
- [ 1.734577] hub 7-0:1.0: USB hub found
- [ 1.738746] hub 7-0:1.0: 1 port detected
- [ 1.763325] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.771848] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8
- [ 1.780289] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
- [ 1.844562] hub 8-0:1.0: USB hub found
- [ 1.848728] hub 8-0:1.0: 1 port detected
- [ 1.853342] Initializing USB Mass Storage driver...
- [ 1.858973] usbcore: registered never ums-freecom
- [ 1.904523] usbcore: registered new interface driver ums-isd200
- [ 1.911147] usbcore: registered new interface driver ums-jumpshot
- [ 1.917946] usbcore: registered new interface driver ums-karma
- [ 1.924472] usbcore: registered new interface driver ums-onetouch
- [ 1.931310] usbcore: registered new interface driver ums-realtek
- [ 1.938015] usbcore: registered new interface driver ums-sddr09
- [ 1.944643] usbcore: registered new interface driver ums-sddr55
- [ 1.951302] usbcore: registered new interface driver ums-usbat
- [ 1.957990] uinput result 0 , vmouse_init
- [ 1.958465] mousedev: PS/2 mouse device common for all mice
- [ 1.965305] ls_fetch_sysco[ 2.002127] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
- [ 2.010056] usb 6-1: new full-speed USB device number 2 using sunxi-ohci
- [ 2.018395] sunxi-ir s_cir0: initialized sunXi IR driver
- [ 2.024470] sunxi cedar version 0.1
- [ 2.024513] [cedar]: install start!!!
- [ 2.024718] [cedar]: install end!!!
- [ 2.024965] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18)
- [ 2.034336] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19)
- [ 2.043680] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a)
- [ 2.053032] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfe - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d)
- [ 2.099749] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e)
- [ 2.108940] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
- [ 2.116067] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
- [ 2.127229] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
- [ 2.134684] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
- [ 2.140880] timeout_to_interv, line 167
- [ 2.145132] interv_to_timeout, line 189
- [ 2.149385] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
- [ 2.158479] Bluetooth: HCI UA15:24) Compiled in Aug 6 2016 at 19:15:22
- [ 2.185415] [mmc]: get mmc0's sdc_power is null!
- [ 2.185436] [mmc]: MMC host used card: 0x1, boot card: 0x1, io_card 0
- [ 2.186331] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 2.187560] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 2.187587] no blue_led, ignore it!
- [ 2.189103] [mmc]: sdc0 power_supply is null
- [ 2.191741] Registered led device: red_led
- [ 2.191862] Registered led device: green_led
- [ 2.193177] usbcore: registered new interface driver usbhid
- [ 2.199359] usbhid: USB HID core driver
- [ 2.207393] asoc: sndcodec <-> sunxi-codec mapping ok
- [ file: using arm/armv7-ca7
- [ 2.238562] TCP: cubic registered
- [ 2.239359] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 2.242508] NET: Registered protocol family 10
- [ 2.248431] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.254571] NET: Registered protocol family 17
- [ 2.259767] Bluetooth: RFCOMM TTY layer initialized
- [ 2.265263] Bluetooth: RFCOMM socket layer initialized
- [ 2.271018] Bluetooth: RFCOMM ver 1.11
- [ 2.271032] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 2.271166] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt gistering SWP/SWPB emulation handler
- [ 2.301813] generic-usb 0003:248A:8564.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-sunxi-ohci-1/input0
- [ 2.320419] cmdline,disp=
- [ 2.323619] [HDMI] power vcc-hdmi-18
- [ 2.354629] console [netcon0] enabled
- [ 2.358687] netconsole: network logging started
- [ 2.361563] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 2.363759] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:16 UTC (16)
- [ 2.367088] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 2.367161] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1.392813] ths_fetch_sysconfig_para: type err device_used = 1.
- [ 2.400893] CPU Budget:Register notifier
- [ 2.405245] CPU Budget:register Success
- [ 2.409496] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
- [ 2.422318] [rf_pm]: module power0 name vcc-wifi-33
- [ 2.422333] [rf_pm]: Did not config module_power1 in sys_config
- [ 2.422343] [rf_pm]: Did not config module_power2 in sys_config
- [ 2.422351] [rf_pm]: Did not config module_power3 in sys_config
- [ 2.422360] [rf_pm]: mod has no chip_en gpio
- [ 2.422367] [rf_pm]: failed to fetch lpo_use_apclk
- [ 2.422374] [rf_pm]: regulator on.
- [ 2.422382] [wifi_pm]: no wifi used in configuration
- [ 2.4t mount as ext3 due to feature incompatibilities
- [ 3.710650] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
- [ 3.894467] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 10.584839] systemd[1]: System time before build time, advancing clock.
- [ 11.140501] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 11.141171] systemd[1]: Detected architecture arm.
- [ 11.141586] systemd[1]: Running with unpopulated /etc.
- [ 11.170568] systemd[1]: Set hostname to <OpenELEC>.
- [ 11.171255] systeCompatibility Named Pipe.
- [ 11.572784] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 11.573130] systemd[1]: Listening on Journal Socket.
- [ 11.610423] systemd[1]: Starting Mounting swapfile...
- [ 11.670699] systemd[1]: Mounting Debug File System...
- [ 11.720537] systemd[1]: Mounting Temporary Directory...
- [ 11.771221] systemd[1]: Starting Load Kernel Modules...
- [ 11.804812] HDMI CEC initialized
- [ 11.811384] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 11.814067] UMP: UMP device driver -0.90.0-17295-g5828aec loaded
- [ 11.832959] Get mali parameter successfully
- [ 11.88] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 11.972275] systemd[1]: Created slice User and Session Slice.
- [ 11.972530] systemd[1]: Reached target Slices.
- [ 12.061095] systemd[1]: Starting Setup machine-id...
- [ 12.061997] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 12.062457] systemd[1]: Reached target Paths.
- [ 12.079624] systemd[1]: Mounted Debug File System.
- [ 12.080350] systemd[1]: Mounted POSIX Message Queue File System.
- [ 12.080842] systemd[1]: Mounted Variable Directory.
- [ 12.081295] systemd[1]: Mounted Temporary Directory.
- [ 12.130504] systemd[1]: Started Show Version.
- [ 12.330564] systemd[wapfile.
- [ 12.698574] systemd[1]: Reached target Swap.
- [ 12.781066] systemd[1]: Starting Journal Service...
- [ 12.861205] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 12.960813] systemd[1]: Starting udev Coldplug all Devices...
- [ 13.020728] systemd[1]: Starting Apply Kernel Variables...
- [ 13.070415] systemd[1]: Mounting FUSE Control File System...
- [ 13.140456] systemd[1]: Starting Setup Timezone data...
- [ 13.154857] systemd[1]: Mounted FUSE Control File System.
- [ 13.157634] systemd[1]: Started Journal Service.
- [ 13.899388] systemd-journald[151]: Received request to flush runtime journal from PID 1
- [ 15.967640] get_item_store: input buf wifi_para wifi_used
- [ 15.967670] get_item_store: get "wifi_para"->"wifi_used"
- [ 15.967773] get_item_show(815): script_get_item return type [int] for wifi_para->wifi_used
- [ 16.019354] vmouse_input_dev
- [ 17.838308] get_item_store: input buf bt_para bt_used
- [ 17.838334] get_item_store: get "bt_para"->"bt_used"
- [ 17.838415] get_item_show(815): script_get_item return type [int] for bt_para->bt_used
- [ 19.861804] [pm]state:1 valid
- [ 19.861820] [pm]state:3 valid
- [ 19.861826] [pm]state:7 valid
- [ 20.370298] PHY: gmac0-0:00 - Link is Up - 100/Full
- [ 20.370959] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 22.861125] vmouse_input_dev_open
- [ 23.100076] vmouse_input_dev_close
- [ 23.260464] vmouse_input_dev_open
Add Comment
Please, Sign In to add comment